Filter
Top Products
Hose Handle
Remote ON/OFF Selector for motorized nozzle
*Off – push down on front
Bare Floor – push down on back
*Power ON/OFF for canister can only be controlled by canister ON/
OFF switch.
Vacuum Control
Cleaning suction is reduced by pushing lever to
LOW position. Place lever at HIGH position to
increase suction for carpet cleaning.
1. Snap interlocking wands together.
2. Push assembled wands into power nozzle.
3. Push motorized nozzle plug into the retainer located at the top of
the upper wand; secure cord in slot (Detail A).
4. Place hose handle into wands until plug connects and button locks.
5. Insert hose coupling into top of canister and push hose power cord
into receptacle located on top of canister.
6. Pull on electrical cord and push plug into outlet. To rewind, step on
Cordaway cord reel button, hold and guide plug while it rewinds.
7. Step on motorized nozzle to release handle; pull back to comfortable
work position.
8. Push On/Off canister switch.
(A thermostat automatically shuts off the motor if it overheats, see
Automatic Motor Shut-Off,)
9. Bare floor or carpet cleaning selection on remote control, only.
6
ON
Select bare floor or
carpet cleaning
Detail A
k
k
Hose
Handle
k
OFF
3
1
4
9
2
8
5
7
How to Assemble and Use
Handle
Release
6