How To Maintain
The instructions in this booklet serve as a guide to routine maintenance. To keep the cleaner operating at top
efficiency empty the dust cup and clean the filter after each use.
Empty Dust Cup
CAUTION: Turn off the switch and unplug the electrical cord before servicing.
1. Remove hand vac from the
base unit.
2. Push in on dust cup latch
and pull dust cup from
handle section.
3. Remove dust cup filter from dust
cup. Shake and brush the dust
and dirt from filter. If desired,
launder filter by hand in warm
water using a mild detergent.
NOTE: Air dry thoroughly before
returning to use.
Dust
Cup
Latch
4. Shake contents of dust cup into a waste
container.
5. Replace dry dust cup filter in dust cup and reassemble
following above directions in reverse.
NOTE: Replace a dirty or torn filter.
6. Dust cup may be cleaned with warm water and mild detergent.
Wipe dry, do not put dust cup in dishwasher.
Clean Brush Roll
The brush roll turns to sweep and comb the carpet nap. Keep
the brush roll free from hair and threads so it will continue
cleaning.
8