Filter
Top Products
Installation Instructions
To operate the Remote Control/Wall
Thermostat (Class 2) switch A, you must use
an Optional Interface Module kit. See the
Installation Instructions with accessory kit
RAK0IM.
UP
DOWN
1234 56789A
B
CDE
Remote Control/Wall Thermostat (Class 2)
To operate Central Desk Control (CDC),
switch C, you must have an Optional Interface
Module kit. See the Installation Instructions with
accessory kit RAK0IM.
UP
DOWN
1234 56789A
B
CDE
Central Desk Control (Load Shedding)
Switch B controls the All-Time Low Fan and is
only effective with a Remote Control Thermostat.
This function causes the indoor fan to operate at
low speed. If the switch is
DOWN
(off) the fan will
run in high speed. If the switch is
UP
(on) the fan
will run in low speed.
UP
DOWN
1234 56789A
B
CDE
All-Time Low Fan
18
Auxiliary Controls