GE 106646 Fan User Manual


 
Important Safety Instructions
1.Never insert fingers, pencils, or other foreign objects through
the grill.
2.Disconnect fan when moving it from one location to another.
3.Be sure that the fan is on a stable surface when operating to
avoid the chance of it overturning.
4.Disconnect fan when removing housing parts for cleaning.
Reinstall parts before reconnecting to power supply.
5.DO NOT use this fan in a window. Rain may cause an
electrical hazard.
WARNING: Use of a three-prong to two-prong
adapter is not recommended. Improper connection
may create the risk of electrocution.
6.WARNING: To reduce the risk of fire, electric shock or
personal injury:
a)Do not use this fan with any solid-state speed
control device.
b)Unplug fan before cleaning or servicing.
c)If you disassemble your fan, completely reassemble
before plugging into outlet.
d)Do not use this fan in a window. Rain may create an
electrical hazard.
7.The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no
circumstances must the grounding prong be cut off the plug.
a
18” High Velocity Floor Fan
User’s Guide
106646
e
For product service, call customer service at
368-01-05
Item Stock Number: UPC:
106646 681131066464
Operation
1. Plug the fan into any standard 120 V AC household outlet.
2. Using the rotary switch, set the desired fan speed.
3. Tilt fan to direct air flow.
WARNING:
To prevent fire or electri-
cal shock hazard, do not
expose this product to
rain or moisture.
New 3/01 2085342 1
SEE MARKING ON BOTTOM / BACK OF PRODUCT
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE MOTOR
COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance
Always Unplug Cord Before Using
Cleanning: IMPORTANT! DO NOT immerse electrical parts in
water! Parts may be cleaned with a mild detergent and water.
Wipe all other parts with a soft cloth moistened with water and
mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
RECONNECTING TO POWER SOURCE.
Lubrication: Motor is permanently lubricated.
Store in a clean dry area when not in use.
READ AND SAVE THESE INSTRUCTIONS
IMPORTER:
COMERCIALIZADORA MEXICO AMERICANA S.de R.L. de C.V.
NEXTENGO NO. 78
COLONIA SANTA CRUZ ACAYUCAN
DELEGACION AZCAPOTZALCO
MEXICO D.F. C.P. 02770
TELEFONO (5) 328-3500
RFC: CMA9109119L0
Model 106646
Energy Consumption: 192 W
Operating Frequency: 60 Hz
Voltage: 120 V~