Filter
Top Products
3
5. Slide The bench over the coach bolts and
tighten. Position drilling template as you would the
stove.
PR7569
6. Mark drilling points with a centre punch.
PR7570
7. Drill four Ø8mm holes. Straight through both
sides.
PR7571
8. Remove back cover plate from the stove.
PR7572
9. Lift off stove cover plate.
PR7573
10. Firstly remove all internal parts from the
stove and remove the door. Tip the stove onto its
front on a soft surface that will not damage the
paintwork. Apply felt pads to each corner of the
base.
PR7574
Felt pads
ASSEMBLY INSTRUCTIONS
5
6
7
8
9
10