Filter
Top Products
2
1. Position bench on your hearth and mark
out the 2 key slots on the floor.
2. Remove bench and drill the two marked
positions with Ø8mm hole to 50mm deep.
PR7582
Ø8mm
PR7583
3. Tap in No.8 Rawl plugs.
No8 rawl plug
Ø8mm hole
PR7584
4. Screw in No.8 coach bolt leaving 5mm gap
from the surface of the floor.
No8 Coach Bolt
5mm gap
PR7585
Packing list
• User Instructions
• 3 x Drilling Templates
• 4 x M6 x 90 Coach bolts
• 4 x M6 Washers
• 4 x M6 Nuts
• 2 x No.8 Hex Coach bolt
• 2 x Rawl plugs
• 5 x Felt pads
Tools required
• 10mm A/F Spanner
• 13mm A/F Spanner
• Hammer
• Center Punch
• Power Drill with:
• Ø8mm Masonry drill bit
• Ø8mm Steel drill bit
• Pozidrive attachment
ASSEMBLY INSTRUCTIONS
1
2
3
4