Stovax 7105 Stove User Manual


 
7
USER INSTRUCTIONS
5.2 Burning Solid fuel:
To burn solid fuel efficiently in a wood version the multi-
fuel kit should be fitted.
Multi-fuel kit part numbers:
Appliance Part No.
Stockton 5 (all) 7108
Stockton 6 (all) 7117
Stockton 7 7109
Stockton 8 7111
Stockton 8 Slimline 7111SL
Only for use with recommended fuels, see Installation
Section for full fitting details.
•Setaircontrols,SeeDiagram10
PR8006
5.2 De-ash the fire bed before re-fuelling, See Ash Removal
•OpenthePrimary air control fully to establish a glowing
bed before adding new fuel
•Burnnewfuelathighoutputforafewminutesbefore
adjusting the Primary air control to the desired setting
•Refuellittleandoftenforclean,efficientburning.
5.3 Experience establishes control settings to suit personal
preferences
5.4 Do not burn large amounts of fuel with the Primary Air
Control on low settings for long periods of time. This
reduces the glass cleaning effect of the airwash and causes
tars and creosotes to build-up in the appliance and flue
system.
PR8004
•Closethedoorifdesired.
•Useasparkguardifrunningwiththedoorsopen
5. RUNNING THE APPLIANCE
5.1 Burning Wood:
•ClosethePrimary air control (multi-fuel versions only)
and use the Airwash to control the burn rate when
appliance is at operating temperature, see Diagram 9
PR8005
•Woodburnsbestonabedofash
•Raketheembersevenlyoverthefirebedandopenthe
Airwash control fully for a few minutes before re-fuelling
4.2 Burn new logs at high output for a few minutes before
adjusting the Airwash control. Refuel little and often for
clean, efficient burning.
4.3 Experience establishes settings to suit personal preferences.
4.4 Do not burn large amounts of fuel with the Airwash control
closed for long periods of time. This reduces the glass
cleaning effect and causes tars and creosotes to build-up in
the appliance and flue system.
4.5 When in use, burning the appliance at high output for a
short period also reduces tars and creosote.