26
1.4 Using the appliance for the first time:
•Burn at a low output for the first day of use
This allows the seals, fixing glues and paint to fully cure.
1.5 During this time the appliance may give off some
unpleasant odours:
•Keeptheroomwellventilatedtoavoidabuild-upof
fumes
1.6 Your Stovax dealer can carry out service and maintenance.
2. REMOVAL OF THE LOG GUARD
2.1 To remove the Log guard:
•LiftLogGuardclearofthesupportingbrackets
•Rotatetoclearthesidesofthedooropening.
Do not use appliance without the log guard in position.
3. FITTING AND REMOVAL OF FIREBRICKS
3.1 See Section 3 Fitting & Removal of Baffle in Installation
section.
4. FITTING AND REMOVAL OF BAFFLE
4.1 See Section 4 Fitting & Removal of Baffle in Installation
section.
5. FITTING OPTIONAL MULTI-FUEL KIT TO
STOCKTON 5/6/7/8
5.1 See Section 5A and 5B Fitting Multi-fuel Kit in Installation
section.
6. FITTING A NEW DOOR GLASS
6.1 To maintain the safe use of your stove you may need to
replace a damaged door glass.
6.2 To complete this operation:
•Openthedoor
•Liftitfreeofthehingeblocks
•Liethedoorfacedownonasoftflatsurface,toprotect
the paintwork and glass
MAINTENANCE and SERVICING
Fixing Screws (x4)
Fixing Clips (x4)
Glass
Glass Seal
Door
PR7080
Single Door
Fixing Screws (x10)
Fixing Clips (x4)
Fixing Clip Long (x2)
Glass (x2)
Glass Seal (3mm)
Door (x2)
PR7081
Double Door
•Removetheglassclipfixingscrews(4)
•Lifttheoldglasscanthenbeliftedclearofthedoor
(Note how the 3mm sealing rope is placed between the
glass and the door.)
•Disposeoftheoldglasssafely
•Clean,andre-paint,therearofthedoorifrequired
•Cleanthescrewswithlightoil
•Coatwithhightemperatureanti-seizegreasetoaidfuture
removal
•Fitnewsealingropebetweenthenewglassandthedoor
•Placetheglassintopositioninthedoor
•Placetheglassfixingclipsintoposition
•Re-fixwiththecleanfixingscrews