Filter
Top Products
14
PRE-INSTALLATION CHECKS
Without liner system
round (diameter)
mm
mm
inch
mm
inch
inch
m
feet
Without liner system (square)
minimum dimension
With liner or factory made
system (diameter)
installed in accordance with manufacturers instructions
Flue/Chimney
Size
Flue/Chimney
minimum height*
* When measured from the top of the stove to the top of the flue, with no horizontal sections
and a maximum of 4 bends with angles of less than 45°
2.1 Additional ventilation will be required to comply with the
requirements of the Building Regulations. This should be
provided using a permanently open air vent, of the size
listed, which is positioned so that it is not liable to be
blocked both inside and outside the building.
2.2 Extractor fans or cooker hoods should not be placed in the
same room or space as the appliance.
2.3 If any of these checks reveal problems do not proceed
with the fitting of the appliance until they have been
rectified.
2. ADDITIONAL VENTILATION
Additional Ventilation
Model
Sheraton - 7016 / 7017 / 7027
Model
Sheraton - 7016/7017/7027
mm
2
cm
2
in
2
Sheraton
Sheraton
150
6
135
5
1
/
2
150
6
4.5
15
1650
16.5
2.55