Gardena RP 600 Heat Pump User Manual


 
22
GB
1. Pull off the fountain socket
1
and nozzle tube
2
.
2. Unscrew the fountain insert
B
and clean it.
3. Remove the filter housing
4
from the motor housing
6
, and
clean it.
4. Turn the pump inlet
5
anticlockwise and pull it vertically off
the motor housing
6
(bayonet socket).
5. Take the impeller
A
out of the motor housing
6
and clean it.
6. Push the cleaned impeller
A
back into the motor housing
6
.
7. Push the pump inlet
5
vertically onto the motor housing
6
and tighten it clockwise. (If the pump is to suck from
underneath, the thread must face downwards).
8. Push the filter housing
4
back on to the motor housing
6
.
9. Screw the desired fountain insert
B
into the fountain
socket
1
.
10. Plug the fountain socket
1
and nozzle tube
2
back into
place.
Cleaning the RP 600:
B
1
2
A
5
6
4