Filter
Top Products
13
GB
Attach the filter trough:
Attach the motive water
hose
(only for set 7940):
4
3
3
5
c
c
1
4. Assembly
1. Pull the side clips
a
slightly away from
the filter trough
1
and remove the
splashguard
2
.
2. Insert the filter sieves
3
into the filter
trough
1
with the ridges facing
b
downwards.
3. Install the collecting basket
4
in the
filter trough
1
.
4. Push the red adjuster
c
in the direc-
tion of the arrow and push the feet
5
(with the side notches facing outwards)
into the filter trough
1
from below.
5. Push the sealing ring
6
onto the nozzle
housing
7
.
6. Push the nozzle housing
7
into the filter
trough
1
from the front.
7. Screw the threaded ring
8
onto the
nozzle housing
7
from
the inside.
8. Screw the small threaded connector
9
onto the nozzle housing
7
.
9. Push the splashguard
2
onto the
feet
5
from above until the clips
a
lock into place.
1. Push the union nut
0
over the motive water hose
A
.
2. Push the motive water hose
A
all the way into the universal
adaptor
B
.
3. Screw the union nut
0
onto the universal adaptor
B
and
tighten by hand.
4. Repeat for the other end of the hose.
6
9
8
1
7
BB 00 AA
123
a
2
5
9
2
1
1
2
1
b
a