Filter
Top Products
G
19
G
18
The information on the rating plate and the data of the power
supply system must match.
The GARDENA Radio Remote Control Socket may only be
connected to 230 V AC sockets installed by an electrician which
meet the construction regulations in accordance with VDE 0100.
If necessary please contact your electrician.
Devices up to a maximum of 1200 Watts may be connected to
the GARDENA Radio Remote Control Socket.
Your Radio Remote Control Socket has an integrated child-
safety feature.
The programming is retained if there is a power cut.
x You should replace the batteries of the remote control
annually. You must change the batteries straight away if you
decide to move the unit and drastically reduce the trans-
mission area.
x To ensure the Radio Remote Control Unit works properly
and safely only use a 9 V alkali-manganese (alkaline) battery
TYPE IEC 6LR61. Ensure you insert the battery correctly
(please note +/- markings).
Batteries
Power Cut
Child-Proof
Devices
Connection to
230 V AC sockets
Please Observe the Voltage
Summary Operating Instructions
4
1. Plug the devices
you wish to control
remotely into the
GARDENA Radio
Remote Control
Socket and switch
on.
2. You can now switch
devices on and
off using the Radio
Remote Control
Unit.
3
Assigning keys of the
GARDENA Radio
Remote Control Unit
to the corresponding
socket:
➔ While the LED on
the Remote Control
Socket is flashing,
press one of the
On keys on the
GARDENA Remote
Control and hold
down for 1 second.
2
1. Press the On/Off
key. Keep the
On/Off key pressed
down while plug-
ging the GARDENA
Remote Control
Socket into a 230 V
AC mains socket.
2. Release the On/Off
key after 5 seconds.
1
➔ Insert the battery
in the GARDENA
Radio Remote
Control Unit.
Use a 9 V alkali-
manganese (alkaline)
battery Type IEC
6LR61 and observe
the +/- markings.