Fujitsu Room Air Conditioner - Wall Mounted Air Conditioner User Manual


 
9
To Use the ON timer or OFF timer
1
While the air conditioner is operating or stopped, press
the TIMER button (Fig. 6 K).
Both the indoor units OPERATION indicator lamp (green or red) (Fig. 3
5) and the TIMER indicator lamp (yellow) (Fig. 3 6) will light.
2
Press the TIMER button (Fig. 6 K) to select the OFF
timer or ON timer operation.
Each time the button is pressed the timer function changes in the follow-
ing order:
RESET SLEEP OFF ON
PROGRAM (OFF ON, OFF ON)
The indoor units TIMER indicator lamp (yellow) (Fig. 3 6) will light.
3
Use the SET TIME buttons (Fig. 6 I) to adjust the de-
sired OFF time or ON time.
Set the time while the time display is flashing (the flashing will continue
for about five seconds).
button: Press to advance the time.
button: Press to reverse the time.
About five seconds later, the entire display will reappear.
To Use the PROGRAM timer
1
While the air conditioner is operating or stopped, press
the TIMER button (Fig. 6 K).
Both the indoor units OPERATION indicator lamp (green or red) (Fig. 3
5) and the TIMER indicator lamp (yellow) (Fig. 3 6) will light.
2
Set the desired times for OFF timer and ON timer.
See the section To Use the ON timer or OFF timer to set the desired
mode and times.
About three seconds later, the entire display will reappear.
The indoor units TIMER indicator lamp (yellow) (Fig. 3 6) will light.
3
Press the TIMER button (Fig. 6 K) to select the PRO-
GRAM timer operation (either OFF ON or OFF ON
will display).
The display will alternately show OFF timer and ON timer, then change
to show the time setting for the operation to occur first.
The PROGRAM timer will begin operation. (If the ON timer has been
selected to operate first, the unit will stop operating at this point.)
About five seconds later, the entire display will reappear.
TIMER OPERATION
sss
t
Before using the timer function, be sure that the Remote Control Unit is set to the correct current time (See page 5).
To Cancel the Timer
Use the TIMER button to select TIMER
RESET.
The air conditioner will return to normal
operation.
To Change the Timer Settings
Perform steps 2 and 3.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change the operating
conditions (Mode, Fan Speed, Thermostat
Setting), after making the timer setting,
wait until the entire display reappears, then
press the appropriate buttons to change
the operating condition desired.
To Cancel the Timer
Use the TIMER button to select TIMER
RESET.
The air conditioner will return to normal
operation.
To Change the Timer Settings
1.
Follow the instructions given in the section
To Use the ON Timer or OFF Timer to se-
lect the timer setting you wish to change.
2. Press the TIMER button to select either
OFF ON or OFF ON.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change operating conditions
(Mode, Fan Speed, Thermostat Setting),
after making the timer setting, wait until
the entire display reappears, then press the
appropriate buttons to change the operat-
ing condition desired.
About the PROGRAM timer
The PROGRAM timer allows you to integrate OFF timer
and ON timer operations in a single sequence. The se-
quence can involve one transition from OFF timer to ON
timer, or from ON timer to OFF timer, within a twenty-
four hour period.
The first timer function to operate will be the one set near-
est to the current time. The order of operation is indi-
cated by the arrow in the remote control units display
(OFF ON, or OFF ON).
One example of PROGRAM timer use might be to have
the air conditioner automatically stop (OFF timer) after
you go to sleep, then start (ON timer) automatically in
the morning before you rise.
About the ON timer
The timer function is designed to bring your room to a
comfortable temperature by the set time; as a result, the
unit automatically begins operation before the set time
so that the room reaches the desired temperature by the
time set on the timer.
The hotter it is in summer, or the colder it is in winter, the
earlier that operation will begin.
* During Heating Operation .......from 45 to 10 minutes be-
fore set time.
During Cooling/Dry Operation ... from 20 to 10 minutes be-
fore set time.
During Fan Operation ..............at the set time.
s