Filter
Top Products
En-3
OPERATION
Instructions related to heating are applicable to “HEAT & COOL MODEL” (Reverse Cycle).
To start/stop operation
Press the START/STOP button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
To set the operation mode
Operation mode setting
Press the MASTER CONTROL button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL DRY FAN HEAT
Room temperature setting
Lower Raise
Press the SET TEMPERATURE buttons to set the room temperature.
Temperature setting range
AUTO ............................................................ 64 to 88 °F
COOL/DRY .................................................... 64 to 88 °F
HEAT ............................................................. 60 to 88 °F*
Fan speed setting
Press the FAN CONTROL button to set the fan speed.
AUTO HIGH MED LOW
Energy save setting
ENERGY
SAVE
Press the ENERGY SAVE button to start or stop the energy-
saving air conditioner operation.
For details on th function, refer to page 9.
OM_9373117063-en.indd Sec1:3OM_9373117063-en.indd Sec1:3 9/10/07 5:16:09 PM9/10/07 5:16:09 PM