Filter
Top Products
En-7
SLEEP TIMER
MASTER
CONTROL
SET
TEMP.
SET
TIME
FAN
CONTROL
START/STOP
COOL
SLEEP TIMER
MASTER
CONTROL
SET
TEMP.
SET
TIME
FAN
CONTROL
AUTO
SLEEP TIMER
MASTER
CONTROL
SET
TEMP.
SET
TIME
FAN
CONTROL
START/STOP
F
OPERATION
To Select Mode Operation
Press the START/STOP button (Fig. 6 ¡).
The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig.3 5) will light.
The air conditioner will start operation.
Press the MASTER CONTROL button (Fig.6 *) to select
the desired mode.
Each time the button is pressed, the mode will change in the following order.
1
Example: When set to COOL
About three seconds later, the entire display will reappear.
Example: When set to 80°F.
Example: When set to AUTO.
The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
AUTO COOL
DRY
FAN
In order to increase the drying effect
during quiet cooling operation, the fan
of the indoor unit may stop.
To Set the Thermostat
Press the TEMPERATURE set button.
button: Press to increase the thermostat setting.
button: Press to lower the thermostat setting.
¶ Thermostat setting range:
Cooling/Drying ..................................................... 64°F to 88°F
Fan......................................................................... 62°F to 88°F
About three seconds later, the entire display will reappear.
NOTE:
¶ The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
¶ During Fan mode, set the unit to “– –” for continuous fan operation regardless
of room temperature.
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 6 +).
Each time the button is pressed, the fan speed changes in the following order:
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling: As the room temperature approaches that of the thermostat setting, the
fan speed becomes slower.
Fan: The fan will operate at the optimum speed in accordance with the room
temperature in the vicinity of the indoor unit.
When set to QUIET:
SUPER QUIET operation begins. The indoor unit's airflow will be reduced for qui-
eter operation.
¶ SUPER QUIET operation cannot be used during Dry mode. (The same is true
when dry mode is selected during AUTO mode operation.)
¶ Cooling performance will be reduced somewhat during SUPER QUIET opera-
tion.
AUTO
LOW
MED
HIGH
3
333
3
QUIET
2