Fujitsu AST12 Air Conditioner User Manual


 
4
Fig. 5 Remote Control Unit
D SLEEP button
E MASTER CONTROL button
F SET TEMP./SET TIME buttons (
)
G Signal Transmitter
H TIMER button
I FAN CONTROL button
J START/STOP button
K AIR FLOW DIRECTION button
L SWING LOUVER button
M TIME ADJUST button
N ACL button
Rear side (Fig. 6)
O TEST RUN
Touch the two metal contacts with a me-
tallic object to send the signal to perform
a test run.
Perform a test run only when installing the
air conditioner. If the signal to perform a
test run is received during normal opera-
tion, the air conditioner’s thermostat will
malfunction.
If the signal to perform a test run is re-
ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.
To stop the test operation mode, press the
START/STOP button to stop the air condi-
tioner.
P Remote Control Unit Display (Fig. 7)
Q Transmit Indicator
R Clock Display
S Operating Mode Display
T Timer Mode Display
U Fan Speed Display
V Temperature Set Display
W Timer Set Indicator
X Temperature Set Indicator
Fig. 1 Indoor Unit
1 Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
3 Remote Control Signal Receiver
4 Indicator Lamps (Fig. 3)
5 OPERATION Indicator Lamp (red)
Lights when unit is operating.
*
The lamp will flash slowly when the de-
frosting operation (see page 17).
*
The lamp will flash quickly (1 second on, 1
second off) when the selected operating
mode can not be used (see page 18).
6 TIMER Indicator Lamp (green)
If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(see page 17 Auto Restart).
7 SWING Indicator Lamp (orange)
8 Intake Grille (Fig. 4)
9 Air Filter
0 Air Flow Direction Louver
A Right-Left Louver
(behind Air Flow Direction Louver)
B Drain Hose
C Air Cleaning Filter