Fujitronic FH-777 Fan User Manual


 
6
LOW speed + NATURE mode:
In NATURE mode, press the SPEED button to LOW. Both LOW and NATURE indicators will
be on. The wind speed will change automatically as follows:
-MED speed 5 sec.
Æ LOW speed 15 sec. Æ MED speed 5 sec. Æ LOW 15 sec. Æ Stop
5 sec.
Æ MED speed 5 sec. Æ LOW speed 10 sec. Æ MED speed 5 sec. Æ LOW 10
sec.
Æ Stop 5 sec. Æ MED speed 5 sec. Æ LOW speed 20 sec. Æ Stop 5 sec. The unit
will work continuously in this mode until the unit is power off.
HIGH speed+ SLEEP mode:
In SLEEP mode, press the SPEED button to HIGH. Both HIGH and SLEEP indicators will be
on. The wind speed will change automatically as follows:
- First 0.5 hr: HIGH and MED speed wind alternate in every 10 sec
-Second 0.5 hr: MED speed wind
-After 1hr or until the unit is power off: LOW speed wind
MED speed + SLEEP mode:
In SLEEP mode, press the SPEED button to MED. Both MED and SLEEP indicators will
be on. The wind speed will change automatically as follows:
- First 0.5 hr: MED and LOW speed wind alternate in every 10 sec
-After 0.5 hr or until the unit is power off: LOW speed wind
LOW speed + SLEEP mode:
In SLEEP mode, press the SPEED button to LOW. Both LOW and SLEEP indicators will
be on.
- LOW speed wind for 10 seconds and stops for 5 second. This process alternates in every
15 seconds until the unit is power off.
Note: To avoid overcooling, do not adjust the wind direction directly to human body.
SPEED button
1. When the POWER button is pressed, HIGH
speed indicator
HIGH” will be on and the
strongest wind comes out.
2. Press the SPEED button once, the MED
speed indicator
MED” will be on and the mild
wind comes out.
3. Press the SPEED button again, the LOW
speed indicator
LOW” will be on and the softest
wind comes out.
SWING button
Press the SWING button and the wind bar will start swinging. The swing can cover up to 60
degrees horizontally. Press the SWING button again to stop the wind bar at a desired
position.
TIMER button
1. Press the TIMER button to adjust the timer setting. Each press adds 30 minutes to the timer
and it can be set for up to 7.5 hours. The set timer is indicated on the display.