Frigidaire FGGF304DLB Stove User Manual


  Open as PDF
of 36
 
8
BEFORESETTINGSURFACEBURNERCONTROLS
BeforeSettingSurfaceBurnerControls
LocationsoftheGasSurfaceBurners
Your range is equipped with gas surface burners with
different BTU ratings. The ability to heat food quicker and
in larger volumes increases as the burner size increases.
The small SIMMER burner is best used for simmering
delicate sauces, etc. This burner is located at the right
rear burner position on the cooktop.
The STANDARD burner can be used for most surface
cooking needs. The standard burner is located at the left
front position on the cooktop.
The OVAL burner is best suited when using rectangular
or long shaped cookware. The oval burner is located at
the center position on the cooktop.
The POWER burner is best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. The POWER burners
are located at the right front and left rear burner
positions on the cooktop.
Regardless of size, always select cookware that is suitable
for the amount and type of food being prepared. Select a
burner and ame size appropriate to the pan. Never allow
ames to extend beyond the outer edge of the pan.
Assemblyofthesurfaceburnercapsand
burner grates
It is very important to make sure that all of the Surface
Burner Caps and Surface Burner Grates are installed
correctly and at the correct locations.
1. Remove all packing material from cooktop area.
2. Discard all packing material (if applicable).
3. Position the burner caps in the correct position.
4. Unpack Burner Grates and position on the cooktop.
Note:Burnerheadsarexed.Donottrytoremove
them.
REMEMBER—DONOTALLOWSPILLS,FOOD,
CLEANING AGENTS OR ANY OTHER MATERIAL TO
ENTER THE GAS OPENING. Always keep the Burner
Caps in place whenever the surface burners are in use.
Burner
Cap
Fixed Burner Head
Gas Opening
 previous next