Filter
Top Products
6
Air Conditioner Features
(continued)
SZ000728(En)-Yaokong 09/20/2005, 5:30 PM6
TO ADJUST FAN SPEEDS:
YOU WILL SEE (10-99):
A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the “SLOWER” button is pressed the motor speed
will
slow down at various intervals, down to a minimum setting of 10. To speed the motor up, press the “FASTER” button. The speed will incr-
ease
at multiple intervals to a maximum setting of 99. Display will revert back to temperature setting after a short time.
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
TO USE AUTO TEMP FEATURE:
YOU WILL SEE:
Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn’t
get
too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go
to the highest
speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
DO THIS:
PRESS AUTO
TEMP
BUTTON
LIGHT ON
TO OPERATE ON FAN ONLY:
YOU WILL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember to open the
vent
during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Exc-
ept “Auto Temp”).
Du
ring this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
LIGHT ON
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY