Filter
Top Products
37
FRR026
NUT
(4 REQUIRED)
NUT
(4 REQUIRED)
SCREW
(4 REQUIRED)
SCREW
(4 REQUIRED)
BEND TABS DOWN
NOTE: SCREW AND NUT
ORIENTATION NOW REVERSED.
NOTE: HOLES IN SILL
PLATE MOVED TO
BACK SIDE
TURN SILL PLATE
END TO END
SILL PLATE
CABINET
CABINET
DETAIL A
RETFAEROFEB
DETAIL B
DETAIL C
FRR027
MODEL A
SMALL CHASSIS 7-3/8”
MEDIUM CHASSIS 7-3/8”
LARGE CHASSIS 15-1/8”
2" MINIMUM
BOTH SIDES
CONDENSER AIR
INTAKE LOUVERS
A
CONDITIONED
ROOM SIDE AIR
TOP VIEW
CONDENSER AIR
INTAKE LOUVERS
MAXIMUM WALL THICKNESS
TOP VIEW SHOWING
BEVELED SIDES FOR
AIR INTAKE.
WALL BELOW UNIT MUST
BE BEVELED ALSO.
CONDENSER AIR
OUTLET / REJECTED
HEATED AIR
NOTE: CONDENSER AIR INLETS AND OUTLETS
MUST BE UNOBSTRUCTED TO AVOID THE
RECIRCULATION OF REJECTED HEATED AIR.
Figure 39
Figure 40