Friedrich YS10 Air Conditioner User Manual


 
13
FRR130
Use the or buttons to adjust the day (1 to 7). The day setting is up
to the you the user. If you set the current day = 1, and today is Tuesday,
then Day 1 = Tuesday.
SET POINT
F
AUTO FAN
FRR131
Press TIMER SET (Refer to Figure 10) button to exit and save the SET
TIME function. The TIMER SET button must be pressed within 15 second.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
ºF - ºC Select
SET POINT
F
AUTO FAN
FRR132
To switch from degrees Fahrenheit (F) to Celsius (C), press or
buttons for three seconds.
FRR133
from F to C, press the or button within 5 seconds.
FRR134
The ºF icon goes away and the ºC icon illuminates on the normal display.
SET POINT
AUTO FAN
C
FRR135
DIM Function
There are three separate display brightness levels, AUTO, 20% and full
(100%). To change the DIM setting, press the Power button for three
seconds.
FRR192
The 1 indicates a DIM setting of Auto (factory default). Use the or
buttons to change the setting.
FRR129
Use the or buttons to adjust the minutes. The clock is now set
for 11:25 AM. Press TIMER SET (Refer to Figure 10) button to display the
unit's day setting.