Friedrich WS15 Air Conditioner User Manual


 
3
efi
WELCOME to years of economical comfort
Your new Friedrich Room Air Conditioner has been carefully
,elba dnep ed fo sraey ynam uoy evig ot derut caf u nam dna dereenigne
cient operation, keeping your room at a comfortable temperature
ruoy otni tliub neeb evah serut aef artxe ynaM .level yt i dim uh dna
Friedrich Room Air Conditioner to assure quiet operation, greatest
circulation of cool, dry air, most flexible selection of function controls,
and high economy of operation.
There are many things you can do in and around your home to save
more money - and even increase the eficiency and long life of your
Friedrich unit. Here are a few examples:
1. Do not block the fl ow of air to and from the unit - make sure the
tuohguorht ria fo noit ub irt sid neve evig ot detcerid era srevuol
the room. Caution: If air is obstructed and/or defl ected back
into the air conditioner, this may cause the unit to cycle on and
off rapidly, which could damage your unit.
2. Adequate insulation - walls, ceilings, and below fl oors - can save
up to 50% of the cost of cooling in most areas of the country.
3.
4. Install weather stripping around exterior doors and windows.
5. Have a fireplace?
Be sure the damper is closed during air
conditioner operation.
6. When it’s time to
reroof or repaint the outside of your home,
choose light colors. They refl ect heat instead of absorbing it.
7. Shade your outside walls (especially on the west) from the direct
sun; most importantly, shade the unit itself. Trees and shrubs
provide natural shading, but make sure they don’t block the air
flow around the unit. If natural shade isn’t present, awnings are
the best solution for shading the unit and the windows. Also,
avoid areas where too much dust or pollen would be drawn
into the air conditioner.
8. Inside the house, use blinds, screens, or drapes on windows
exposed to the sun. They will reduce your cooling needs.
(Lined or insulated draperies will also help cut heating costs
in winter).
9. Make sure your attic area is properly vented. In addition,
evomer pleh ot srot al it nev rewop ro enibrut gnillatsni redisnoc
hot air
from your attic.
10. Keep your Friedrich unit clean. Use a vacuum cleaner
attachment for accessible parts, but take care not to damage
them. Clean the reusable filter at least twice a month.
11. Set the thermostat at a higher temperature - save 5% in energy
usage for each degree of temperature over 72°F.
Caulking - air leaks around doors, windows, lighting and
plumbing fixtures can account for as much as 30% of the load
on heating and cooling
systems. See that all these areas are
well caulked.
These are some suggestions for saving money on cooling costs.
Some, however, may not be applicable to your house or area. Check
with your local utility company for more especialized information.
Model Plug Type
WS08, WS10, WS12 NEMA No. 5-15P 125 V-15 AMP
WS10, WS13, WS15 NEMA No. 6-15P 250
V
-15 AMP
WE10, WE13, WE15,
WY09, WY12
NEMA No. 6-20P 250V-20 AMP
Electrical Data
Electrical Shock Hazard
WARNING
Make sure your electrical receptacle has the same
configuration as your air conditioner’s plug. If
different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Always plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual
and on your appliance. Always read and obey all safety messages.
This is a safety Alert symbol. This symbol alerts you
to potential hazards that can kill or hurt you and
others.
All safety messages will follow the safety alert
symbol with the word “WARNING” or “CAUTION”.
These words mean:
WARNING
Indicates a hazard which, if not
avoided, can result in severe
personal injury or death and damage
to product or other property.
CAUTION
Indicates a hazard which, if not
avoided, can result in personal injury
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what will happen if
the instructions are not followed.
and damage to product or other property.
NOTICE
Indicates property damage can
occur if instructions are not
followed.
Circuit Rating,
Breaker or Time
Delay Fuse