Friedrich WS Air Conditioner User Manual


 
STEP 3. Attach subbase mounting brackets to holes in sleeve from Step 1 with four 1/4" phillips screws.
STEP 4. Determine correct distance from inside wall to front of subbase. Slide fi ller plates to correct distance and
tighten screws. NOTE: For shorter distances, back of fi ller plate may be cut to size.
STEP 5. Insert wall sleeve and subbase assembly into wall opening as described in instructions provided with wall
sleeve.
STEP 6. Level subbase fl ush with fl oor by adjusting leveling screws at each end of subbase.
STEP 7. After installing chassis into the sleeve, (per unit installation instructions), remove utility cover and route
power cord to fi eld-supplied receptacle if so desired. Replace utility cover.
617-407-00 (10-04)
FRIEDRICH AIR CONDITIONING CO.
Post Office Box 1540 · San Antonio, Texas 78295-1540
4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212
(210) 357-4400 · FAX (210) 357-4480
www.friedrich.com
Printed in the U.S.A.