Filter
Top Products
Reference
Line
Step 6B
Slide the bracket downward and
tighten the mounting screws.
Mount the Door on the Side Bracket
Mounting Latch
Installing Latch Bracket
Latch Bracket Installation
Step 2B
Mount the Side Bracket to
the right side of the wall
opening. The Side Bracket
must be plumb (vertical).
Secure with four
#
8 x 1
1
/
4
" pan-head screws.
NOTE: Hinge tabs must
point upward.
Step 3B
Install door onto the
Side Bracket. Be
sure that the access
door has engaged
the three tabs, and
the door is against
the side mounting
bracket.
Latch
mounting
hole in door
Step 4B
Close the door. Draw a temporary horizontal reference line on
the wall adjacent to the center of the latch mounting hole.
Step 5B
Attach the latch
bracket to the opening,
aligning the bottom of
the bracket with the
reference line. Use two
#
18 x 1
1
/
4
screws.
Do not tighten.
Latch mechanism
NOTE: The latch
mechanism should already
be factory mounted. This
assembly is shown for
reference. The latch arm
is adjustable to provide
a secure, rattle-free
installation. Install the lter.
Orientation
markings
Front View
Side View
Access Panel
Latch Mechanism
Latch Arm
Draw
Reference
Line on wall
Mounting the Side Bracket