Filter
Top Products
.
VPRG4
Parts Included in this Kit
VPRG4 Return Air Grille / Access Panel
(58" Tall x 29" Wide)
2x Mounting Bracket (left and right)
Mounting Screws
Parts not Included in this Kit
25" x 20" Filter
5/32" Allen wrench for latch
mechanism operation
Frame and sheetrock the access hole to 27" wide
and 55
3
/
4
" tall. The bottom of the opening should
be at the same level as the floor or subbase. The
chassis must fit thru this opening. The chassis is
23
1
/
8
" wide and 32
1
/
4
" or 47" tall (consult chassis
specifications for actual dimensions).
25" x 20" Nom. Filter
(field supplied)
VPRG4
Return Air Grille /
Access Panel
920-134-04 (2-10)
Filter mounts on
inside of door.
Side Bracket
Installation Instructions
Return Air Grille/Access Panel
For Vert-I-Pak A Series Units only
Please read these instructions completely before attempting installation.
NOTE: These instructions apply to Vert-I-Pak Series units only. Refer to Chassis Installation/Operation Manual
for additional information