Friedrich SS10M10 Air Conditioner User Manual


 
36
FRR032
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
<- COOLSET POINT
F
AUTO
AUTO
Programmable Thermostat
Factory settings are shown in addendum 1 (Schedule Table with Energy
Saving Values). These values can be changed by following the procedures
in the preceding paragraphs. Basic options are: Four (4) day groups.
1. Monday through Friday.
2. Saturday and Sunday only.
3. Monday through Sunday.
4. Individual days (Mon thru Sun).
Each of the day groups have four (4) time periods: WAKE (06:00), AWAY
(08:00), RETURN (18:00), and NIGHT (22:00).
The start time for each of the time periods can be changed. In addition,
each time period can have its own temperature and fan mode.
For example, let’s say you are in a cool climate region. You leave for work
at 08:00 and return home around 18:30. You can set the temperature lower
while you are away from your home. At 18:00, you set the temperature
higher for the RETURN period so the room is nice and comfortable when
you arrive.
Set Schedule Sequence – 1 Wake Period
Press and hold
for three (3) seconds to enter the schedule setting
mode and returns to normal display without saving any settings that might
have been changed. To exit and save the changes, press and hold
for three (3) seconds. All changed parameters will be saved. The
key allows the user to back up through the menus.
FRR033
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
A
WAKE
M
T W
T F S
S
M
the schedule icon blinks. The display begins with all weekday (MTWTF)
dots lit. Changes made will apply equallyto all weekdays.
FRR034
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
A
WAKE
M
T W
T F S
S
M
The user can select a different day group by pressing . If the user
continues to press , the system will cycle through all the day groups
in the following order: MTWTF SS Mon, Tues, Wed, Thur, , Fri,
Sat, Sun.
FRR035
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
A
WAKE
M
T W
T F S
S
M
To change the time, press (UP) or (DOWN) to increment/decrement
the time by 15 minute jumps. Once the correct time is set, press to
advance to the next step.
Set Schedule Sequence – 2 Wake Period
FRR036
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
F
CONTINUOUS
WAKE
M
T W
T F S
S
Now you can adjust the settings for SYSTEM, FAN MODE, FAN SPEED
and TEMPERATURE.
FRR037
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
F
CONTINUOUS
WAKE
M
T W
T F S
S
<- COOLSET POINT
Press , , or to change the perspective option. Use the
(UP) or (DOWN) to adjust the cool setpoint.
Your unit’s digital control features an advanced 7 day programmable
thermostat feature that can be used to turn the unit on or off or even
change modes and maintain temperatures throughout the day.
Note the last day group is each individual day. In other words, the user can
adjust each of the four (4) time period start times per day. This is a real
helpful feature if you have an adjustable work shift. Each day group begins
showing the start time for the wake time period.