Friedrich SQ08 Air Conditioner User Manual


 
7
Standard Filter Cleaning / Installation Instructions
STEP 1. Swing the door open and remove the lter by grasping the
lter grip and pushing the lter holder upward and outward.
STEP 2. Clean the front frame by washing the dirt from the lter. Use a
mild soap solution if necessary. Allow lter to dry.
STEP 3. Install the lter back into the unit. Follow the Instructions on
the inside of the front door.
Figure 2
Figure 3
STEP 1. Remove the black plastic lter frame from the unit following the
instructions on the inside of the lter door. (Washable mesh
lter is included and is permanently attached to lter frame).
STEP 2. Lay the black plastic lter frame on a at surface, with the 6
lter frame hooks facing upward.
Please follow the instructions below to install the Friedrich carbon lter. The carbon
lter should be replaced after 300 hours of operation, 3 months, or more often if
needed for maximum effectiveness.
When you replace the carbon lter, clean the washable mesh lter if dirty. Allow
mesh lter to dry before reinserting.
Premium Carbon Filter Installation Instructions
Place the carbon lter over the lter frame so that the carbon
lter’s 6 installation holes align with the 6 lter frame hooks.
(Figure 4)
Secure the carbon lter to the lter frame. Make sure that
all 6 lter frame hooks are inserted through all 6 installation
holes of the carbon lter. The installation hooks will hold the
lter securely.
STEP 3. Place the black plastic filter frame with the carbon filter
installed (Figure 5) back into the front of the unit, following
the instructions on the inside of the lter door.
Carbon lter is now ready for use!
Figure 4
Figure 5
FRR075
FILTER
DOOR
FRR076
FILTER FRAME
INSTRUCTIONS
FILTER
DOOR
FRR077
FILTER FRAME
HOOKS (6)
FRR078