Filter
Top Products
14
External Control Status
The
$MART
icon illuminates to indicate that the system is being controlled
remotely.
SET POINT
F
AUTO FAN
79
FRR125
$MART
The icon illuminates to indicate that the system is receiving a Wi-Fi
connection.
SET POINT
F
AUTO FAN
79
FRR126
The control system has:
Timer (factory default) - Allows you to command the unit to turn
ON and OFF at time you program within a 7 day window. Setting
the start, stop and day window can be found later in this manual.
1
SCHEDULE
FRR137
T1. o change the selection, press and hold the TIMER/SCHEDULE
button for 3 sec.
If the Schedule function is available, the system displays the
+ noci
SCHEDULE
icon. The display indicates the schedule function that is active.
To change to an alternate schedule (2 or 3), press the
or button.
If the Schedule function is not available, the Timer icon
shows without
the
SCHEDULE
icon.
To save and exit this selection, press the TIMER SET button for 3 sec.
(Figure 8).
If there is no button activity for 15 seconds, the function will time out and
leave the original selection. Once the selection is saved or timed out, the
display reverts to the normal display.
2
SCHEDULE
FRR138
After pressing the or button, within 15 second of pressing the
button for 3 seconds, the display indicates a change to Timer/Scheduler
2. To save and exit this selection, press the TIMER SET button (Figure 8).
SET POINT
F
AUTO FAN
79
FRR136
The display reverts to the normal display.
ADVANCED FUNCTIONS
Timer/Schedule Select
SET POINT
F
AUTO FAN
79
FRR136
Commercial (Schedule #2)
- When selected the unit follows a pre-
programmed set of operational parameters that covers 7 days of
the week with 2 time windows during each day. Each time window
has it's own set of 6 operating parameters. Refer to Addendum.
Your unit's advanced functions (Timer, Schedule, Test Mode, and Mainte-
nance Menu). The functions mentioned in the following section may or may
not be available depending on the air conditioner model.
Residential (Schedule #1) - When selected the unit follows a
preprogrammed set of operational parameters that covers 7 days
of the week with 4 time windows during each day. Each time
window has it's own set of 6 operating parameters. Refer to
Addendum.
a
n
d
op
t
t
i
m