Filter
Top Products
Standard Filter Cleaning / Installation Instructions
STEP 1. Swing the door open and remove the ¿ lter by grasping the
¿ lter grip and pushing the ¿ lter holder upward and outward.
STEP 2. Clean the front frame by washing the dirt from the ¿ lter. Use a
mild soap solution if necessary. Allow ¿ lter to dry.
STEP 3. Install the ¿ lter back into the unit. Follow the Instructions on
the inside of the front door.
Figure 2
Figure 3
FRR075
FILTER
DOOR
FRR076
FILTER FRAME
INSTRUCTIONS
FILTER
DOOR
How to Remove the Front Cover
Unplug unit.
STEP 1. .swercs 4 eht evomer dna ,revoC tnorF evitaroceD eht nepO
Save to reinstall later.
FRR098
UNIT COMES WITH POWER CORD
ALREADY INSTALLED AND ROUTED
TO THE LEFT SIDE
SCREWS ATTACHING DECORATIVE
FRONT COVER TO UNIT
(4 REQUIRED)
Figure 18
SCREW, #8 x 1/2” PHILLIPS
HEAD (SEE ILLUSTRATION
ITEM #2, PAGE 22)
2 REQUIRED (1 EACH SIDE)
38