Filter
Top Products
4-3.Disassembly and Reassembly Procedure(SP10A10/SP12A10)
Stop operating the air conditioner, and pull out the power cord before repair.
No. Part Name Procedures Remarks
1 Ass’y Grille
1.Pull the Grille air inlet and Guard air filter out.
2.Remove the screw on the panel front.
3.Hold the lower part of panel with two hands
while pressing down on both sides of the lower
part of the cabinet, pull it forward by about
30mm,and then lift it up carefully for
removal.(Must un-connect the Displayer with
the controller inside.)
2 Ass’y Cabinet
1.Remove 2 screws on the both side of the
cabinet.
2.Pull the front part both side, and remove the
unit from the cabinet.
3 Ass’y Control
1.Remove the earth screw fixed on the cabinet.
2.Remove 3 screws fixed on the partition and
frame up.
3.Remove the screw fixed for the power cord.
4.Un-connect the motor wire and comp lead
wire, then take out the control box upward.
FRIEDRICH AIR CONDITIONING CO. 4-3