Filter
Top Products
4
920-006-05 (10-04)
Figure 2
Function control
There are four positions:
Turn to OFF to turn everything off.
Hl COOL - The fan runs continuously at high speed to
cool the room quickly; the compressor goes on and off to
maintain the temperature selected.
LO COOL - The fan runs continuously at low speed for
gentle circulation of cooled air; the compressor goes on and
off to maintain the temperature selected.
FAN ONLY - The fan runs alone without the compressor
and circulates air without cooling.
To remove filter
Remove the slotted screws from each side of the plastic
front panel and remove the panel (Figure 3). The fi lter can
now be removed for cleaning. Use caution when removing
the fi lter. The internal metal components are sharp. Clean
with warm water and a mild detergent, rinse, shake out,
and allow to dry.
Replace the fi lter in the unit, and replace the front. This
should be done on a regular basis during the cooling
season.
Your Friedrich Casement model is a high effi ciency unit
designed to be installed in a casement window that does
not permit the use of a standard window model. It is simple
to operate and gives you optimum performance despite its
small size.
To start unit
If your air conditioner is installed and plugged into a proper
receptacle, it is ready to go.
Temperature control
The right hand knob is the thermostat, turn it clockwise for
cooler, counter clockwise for warmer.
Figure 3
How to operate your Friedrich room air con di tion er