Filter
Top Products
Model PXSBXXXXX
PXSB230/20/30 or PXSB26515/20/30
92011402_R00 Friedrich Air Conditioning Co. Page 2/5
10001 Reunion Place, Suite 500 / San Antonio, Texas 78216
(210) 546-0500 / (800) 541-6645 / www.friedrich.com
Step 4. Route building power through knockouts provided for conduit connectors into junction box.
See Figure 4.
Step 5. Remove Left access cover and connect building power wires to the receptacle wires using
wire nuts and replace cover. See Figure 5.
Step 6. Using screws provided, attached sub-base to wall sleeve using the drilled holes from
Step2. Be careful not to over tighten screws.
Step 7. Adjust legs to level the sub-base. See Figure 6.
Step 8. Remove Right access cover. Push excess cord through opening on the right. Plug the
power cord into the receptacle. Re-install access cover making sure cord is routed through
notch in sub-base.
Step 9. Re-connect power to unit