Only a qualified professional should perform any repair service(s).
When replacing any electrical components they should be OEM factory components.
Be sure that any electrical components are properly wired and secured.
POWER
BREAKER/FUSE
TRIPPED
SUPPLY CORD NOT
PLUGGED IN OR IS
LOOSE IN POWER
RECEPTACLE
REPLACE SUPPLY
CORD IF RESETTING
DOES NOT CORRECT
UNIT'S POWER CORD
TRIPPED
3 MINUTE TIME DELAY
IS ACTIVATED
ELECTRICAL
COMPONENT
COMPR20ISED
RE-TEST UNIT
TROUBLESHOOTING
THE SEALED SYSTEM
COMPONENTS
TEMPERATURE
SETTING IS NOT
BELOW ROOM
TEMPERATURE
SET TEMPERATURE SETTING
ABOVE (HEATING MODE) OR
BELOW (COOLING MODE)
ROOM TEMPERATURE
REPAIR OR REPLACED ALL
COMPROMISED SEALED
SYSTEM COMPONENTS
WEIGH IN UNIT'S SPECIFIC
REFRIGERANT CHARGE
TROUBLESHOOT
ELECTRICAL
COMPONENTS AND
REPAIR OR REPLACE
PLUG IN SECURELY
THE SUPPLY CORD
RESET SUPPLY
CORD'S LCDI
WAIT FOR THREE
MINUTES
FLOW CHART FOR TROUBLESHOOTING OF THE UNIT
---2---