Filter
Top Products
5
Remote Control Identification and Function
Time/Temperature Set Control
Used for adjusting the timer and temperature
The default display on control panel is room
temperature.
When the " " or the " " button is pressed
in cool mode, the set temperature is displayed
and may be adjusted. After 15 seconds the
display will revert back to room temperature.
Timer setting is available from 1-24 hours by
pressing the button " " on " ".
Mode Control
Press this button to change the operation
mode in the order of:
Cool → Dry → Fan
Farenheit/Celscius Control
Press this button to change back
and fourth from Farenheit to
Celcius temperature readings
Power Control
On/Off
Fan Speed Control
: HIGH : MED :LOW
Timer control
In running mode:
Auto switch off
In standby mode:
Auto switch on
Press the " " or the " " button to
adjust the time setting for 1 hour interval.