Filter
Top Products
8
Installation Instructions
Electrical Data
NOTE TO INSTALLER: Leave these
instructions with the air conditioner after
installation is completed.
NOTE TO CONSUMER: Keep this Installation
and Operating Manual for future use.
Important notes:
It is recommended that proper attire be worn
during installation.
For personal safety, this air conditioner must
be properly grounded.
It is important to have the wall outlet and circuit
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
CAUTION:
Do not under any circumstances, cut or remove
the third (ground) prong from the power cord.
Do not change the plug on the power cord of
this air conditioner.
Aluminum house wiring may present special
problems–consult a qualified electrician.
❒ Phillips-head screwdriver
❒ Flat-blade screwdriver
❒ Ruler or tape measure
❒ Scissors or knife
❒ Pencil
❒ Level
❒ Hammer
Before You Begin
Tools You Will Need
Read these instructions completely and carefully.
Line Cord Plug Use Wall Receptacle Power Supply
Power supply cord with
3-prong grounding plug
Use 15 AMP time
delay fuse or circuit
breaker.
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC