Filter
Top Products
8
EMPTYING THE DUST CONTAINER
Carefully empty out dirt and debris. Very fine dirt and dust particles may seal the
filter and cause loss of suction, as well as damage to the motor.
• Always turn off the vacuum cleaner when emptying the dust container.
• Exceeding the “Max” fill line may cause dirt and debris to seal the filter and cause
loss of suction.
• Empty the dust container before reaching the “Max” fill line and clean the filter often
to prevent various types of dirt particles from sealing the filter.
• Since fine dust, powders and other types of small dirt particles can collect into the
filter after carpet cleaning, suction may weaken. When this happens, please refer to
the Maintenance section on page 9.
1. Remove the dust container.
Press the dust container button to detach
the dust container.
4. Remove the filter from the dust
container cover.
Detaching
Turn
Turn filter counterclockwise to remove.
When filter is clogged with dirt and
debris, remove the filter and wipe off
debris with a tissue.
Turn
Filter's Convex Tab
To reattach the filter, turn and align the
convex tab on the filter to the
(triangle mark) as shown in
the illustration.
Filter
Dust Container
Cover
2. Remove the dust container cover.
3. Empty the accumulated dirt and
debris from the dust container.
5. Shake off dust and dirt from filter.
Attaching
Attaching
Detaching
Detach
DUST
CONTAINER
LEVER
Push
Push the dust container lever and remove.
To attach, join the tab into the slot.
TAB
SLOT
Close
Detach
Dust Container
Button
CAUTION
Push
1
2
1
2
Detach
1
1
2
2
Turn
1
Side view