Filter
Top Products
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
OPTIPATH 360
TECHNOLOGY
TM
Provides 360 degrees of direct access
to the smoke sensing chamber.
SWEEPING
HORN TONE
Varying horn tone makes it easier for elderly
with normal age related hearing loss to hear
the alarm.
END OF LIFE SIGNAL
Provides audible notice when alarm
needs to be replaced.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
Available in the following versions:
SCO5B Alkaline Battery
SCO5LB Long Life Lithium Battery
CAT.
SCO5B Series
Two AA Battery Powered
First Alert Model SCO5 is a battery operated single station photoelectric smoke
and carbon monoxide combination alarm specifically designed for residential and
institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily dwellings as defined in standard NFPA 101.
Model SCO5 has been fully tested and complies with, UL217, UL2034, CSFM,
NFPA 72, and NFPA 101 and other agencies that model their codes after the
above agencies. It meets building codes where battery operated photoelectric
smoke and carbon monoxide combination alarms are required and with model
building codes published by the ICC.
First Alert Model SCO5 is a state of the art smoke and CO combination alarm
designed to provide early warning of a fire or carbon monoxide danger. It
features a photoelectric smoke sensing chamber and an electrochemical CO
sensor. It features a Sweeping Horn Tone that has a lower and varying frequency
that makes it easier for the elderly with normal age related hearing loss to hear
the horn. Two AA alkaline batteries power supply, an End of Life feature and a
single button test/silence. This alarm has two silence features. Low Battery
Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm
Silence: Silence alarm for several minutes. Optipath 360 technology
TM
provides
360 degrees of direct access to the smoke sensing chamber. It also features
tamper resistant locking pins that lock the alarm to the mounting bracket and/or
the battery drawer to prevent removal of battery. Battery installation and removal
can occur while the unit is mounted to the ceiling or wall via the slide out battery
drawer. Designed for wall or ceiling
mounting. Includes
mounting anchors
and screws.
PHOTOELECTRIC
SMOKE & CO
COMBO
ALARM