Filter
Top Products
– 4 –
SYSTEM OVERVIEW (Continued)
Fire Protection
Chime Feature
The fire protection portion of your security system (if used) is always active and will sound
an alarm if a fire condition is detected. When an alarm (or trouble) condition occurs, the
keypad displays the number(s) of the zone(s) that caused the problem, and displays the
type of alarm or trouble — FIRE and ALARM , or CHECK for trouble. The display remains
until it is cleared by entering an OFF sequence (your security code + OFF key) twice.
Your system can be set to alert you to the opening of a door or window while it is dis-
armed by using the CHIME mode. In this mode, three tones will sound at the Keypad(s)
whenever a door or window is opened.
Phone Access &
Voice Response
Capability
(Optional)
Your system may include a phone module that will permit you to access the system via a
Touch-tone phone, either on-premises or by call-in when away. The phone access feature
will enable you to do the following:
• Receive synthesized voice messages over the telephone regarding the status of the
security system.
• Arm and disarm the system and perform most function commands via the telephone,
with voice confirmation provided after each command entry.
Paging Feature If the paging feature has been programmed for your system, your pager will respond to
certain conditions as they occur in your system, and display code numbers indicating the
type of condition that has occurred.
For detailed information, refer to
PAGING FEATURE
on page 25.