Filter
Top Products
Ð33Ð
QUICK GUIDE TO ALARM SYSTEM FUNCTIONS
FUNCTION PROCEDURE COMMENTS
Check Zones Press READY key. To view faulted zones when system not ready.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, INSTANT, MAXIMUM)
Arms system in mode selected.
Quick Arm
(if programmed)
Press #. Press arming key desired:
(AWAY, STAY, INSTANT, MAXIMUM)
Arms system in mode selected, quickly and without use of code.
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Bypassed zones are unprotected and will not cause an alarm if violated.
Quick Bypass
(if programmed)
Enter code. Press BYPASS key. Bypasses all faulted zones automatically.
Silence Sounders
Burglary:
Fire:
"Check":
Enter code. Press OFF key.
Press OFF key.
Press any key.
Also disarms system. Memory of alarm remains until cleared.
Memory of Alarm remains until cleared.
Determine cause. See Page 26.
Disarm System Enter code. Press OFF key. Also silences sounders. Memory of alarm remains until cleared.
Clear Alarm
Memory
After disarming, enter code again.
Press OFF key again.
Keypad will beep rapidly upon entry if alarm has occurred.
Alarm display will remain upon disarming until cleared.
Duress
(if connected to
central station)
Enter user code 8 to arm or disarm "normally." Performs desired action and sends silent alarm to central station.
Panic Alarms
(as programmed)
Press key [A], [B], or [C] for at least 2 sec., or
(if no A, B, or C on your keypad)
press keys [1]&[✴], or [✴]&[#], or [3]&[#],
both at same time.
See Page 23 for functions programmed for your system.
Chime Mode
To turn ON or OFF:
Enter code. Press CHIME
key.
Keypad will sound if doors or windows are violated while system is
disarmed and chime mode is ON.
Test Mode
To turn ON:
Enter code. Press TEST key.
To turn OFF:
Enter code. Press OFF key.
Tests alarm sounder and allows sensors to be tested.