First Alert fa11oc Home Security System User Manual


 
(continued)
SECURITY CODES
To Assign, Change,
1. Enter your Master code and press the CODE key.
Or Delete
User Codes
2. Enter single-digit user number (2 - 7) for which a code is to be
assigned, changed, or deleted.
3. If assigning or changing a user’s code, enter the desired
4digit code for use by that User Number. The keypad will beep once.
If deleting a user’s code, perform steps 1 & 2 and stop. In a few
moments the keypad will beep once, indicating that the existing code
To assign your Duress code, do the following:
Enter your [Master code] + [8] + [8] + [desired 4digit code]. The
keypad will beep once.
The Master code can be changed by the main user of the system. To
change it, do the following:
Enter your [Master code] + [8] + [l] + [new Master code] + [new
Master code] again. The keypad will beep once.
Important: Temporary users should not be shown how to use any
system function they do not need to know (e.g.;bypassing protection
zones).
THESE KEYS NOT PRESENT
<I)(B)
ON ALL KEYPADS -
<c
USE THE CODE KEY
TYPiCAL
TO ASSIGN
OTHER USER CODES
KEYPAD
wirrw CulE
“OUICK ARM” KEY
-ll-