First Alert DWS-472 Home Security System User Manual


 
Page 15
Use to select MOTION DETECTION SENSITIVITY section. Use to highlight camera for setup.
Use to adjust sensitivity level: OFF / LV1 / LV2 / LV3 (LV3 is most sensitive). Press ESC to save and exit.
Use to select FORMAT STORAGE, press
MENU to enter. Press MENU again to confirm
and begin formatting memory card. Press ESC to
exit. NOTE: If a new memory card is used then it
must be formatted first here before use.
MOTION DETECTION SENSITIVITY
FORMAT MEMORY CARD
Recorder Setup-Motion Detection Sensitivity
Recorder Setup-Format Memory Card
RECORDER SETUP
SYSTEM OPERATION
5
Formatting the Memory Card
When you install a new memory card, you must
format it before it can be used. Clicking the FOR-
MAT STORAGE button will begin the formatting
process. WARNING! Formatting an existing SD
Card erases all data. This step cannot be undone.