Filter
Top Products
9
BATTERY CHARGING PROCEDURE
1. Plug the Charging Base into a 110/120 volt
electrical outlet.
2. IMPORTANT:
Make sure that the On/Off switch is turned to
the “Off” position before charging. Otherwise,
your vacuum will not charge.
3.Slide the vacuum downward onto the Charging
Base making sure that the vacuum firmly hooks
onto the Charging Base (see Figure B). Your
vacuum will begin charging and the green LED
light on the Charge Indicator will glow to show
charging is taking place. If your DirtTamer
Deluxe
™
V2210 is completely out of power, a full
recharge will take approximately
10 hours.
NOTE: before first use, charge your
vacuum for at least 24 hours.
4.To maintain a charge, keep the Charger plugged
into a standard wall outlet at all times. When
charging, the Charger may be warm to the
touch. This is normal.
Figure B