FilterStream V2510 Vacuum Cleaner User Manual


 
(b) Remove the two rear screws from the Battery
Bracket leaving the front screw in place.
(c) Unfasten the
battery wire
where the clips
are connected.
(d) Pivot the
Battery Bracket
out of the bat-
tery’s way so the battery can slide free from
the bracket. If the battery has leaked or
vented, protective gloves should be worn
before touching the case. Remove the case by
grasping the
edges and slid-
ing the battery
out of the unit.
(e) To install a new
battery, simply
reverse the
instructions for battery removal. Ensure that
the wires are connected to the correct
terminal on the new battery: red (+) to red (+),
and black (-) to black (-).
ACCESSORIES:
Replacement parts, including filters,
batteries, lamp cartridges and tools are
available by calling 1-800-211-9607.
19
BATTERY REPLACEMENT
b
c
d
FRONT
REAR