Filter
Top Products
9
BATTERY CHARGING PROCEDURE
1. Plug the Charging Base into a 110/120 volt
electrical outlet.
2. IMPORTANT:
Make sure that the On/Off switch is turned to
the “Off” position before charging. Otherwise,
your vacuum will not charge.
3.Slide the vacuum downward onto the Charging
Base making sure that the vacuum firmly hooks
onto the Charging Base (see Figure B). Your vac-
uum will begin charging and the Green LED light
on the Charge Indicator will glow to show charg-
ing is taking place. If your DirtTamer Supreme
V2400 is completely out of power, a full
recharge will take approximately 10 hours.
NOTE: before first use, charge your
vacuum for at least 24 hours.
4.To maintain a charge, keep the Charger plugged
into a standard wall outlet at all times. When
charging, the Charger may be warm to the
touch. This is normal.
SUPREME 12V
Figure B