Filter
Top Products
8
BATTERY CHARGING PROCEDURE
1. Plug the Charging Base into a 110/120 volt
electrical outlet.
2. IMPORTANT:
Make sure that the On/Off switch is turned to
the “Off” position before charging. Otherwise,
your vacuum will not charge.
3.Slide the vacuum downward onto the Charging
Base making sure that the vacuum firmly hooks
onto the Charging Base (see Figure B). Your
vacuum will begin charging and the LED
Charge Indicator will glow to show charging is
taking place.
NOTE: before first use, charge your
vacuum for at least 24 hours.
4.To maintain a charge, keep the Charger plugged
into a standard wall outlet at all times. When
charging, the Charger may be warm to the
touch. This is normal.
CHARGE INDICATOR
The red LED Charge Indicator is “on” when the
vacuum is charging.
Wet/Dry Vacuum
Figure B
Charging Base