Filter
Top Products
Page 8 AirTamer®
On Indicator & Brightness Adjustment:
The brightness of the On
Indicator can be adjusted to
High or Low brightness by
sliding the Dimmer Switch
located on the back of the
unit.
Ground Fault Interruption (GFI):
Whenever your body or another grounded object
(e.g. a gear shift) comes close to either one of the Ion
Emitters , the built-in protection circuit will temporar-
ily stop the fl ow of ions. When your body or grounded
object is moved away, the ion fl ow will resume. The On
Indicator will stay on while this occurs.
Cleaning Exterior Of Unit:
1. Turn unit off.
2. Remove unit from power socket.
3. Gently wipe the exterior with a soft cloth moist-
ened with warm water or mild detergents only. Do
not use harsh solvents or chemicals for cleaning.
4. Remove all moisture with a soft, dry cloth.
5. Allow the exterior to dry completely before rein-
serting the unit into the power socket and turning
the unit on.
Dimmer Switch
A400_UserMan_ENG_03.ind 8 8/23/06, 2:41:52 pm