Filter
Top Products
4. Place the new lters in the main unit.
(True HEPA Filter should always be
inserted rst, then the Carbon Filter)
5. To reset the lter light once a new True
HEPA and/or Carbon Filter is installed:
a. Be sure that back panel is snapped
in place.
b. Turn on the unit.
c. Locate the lter replacement icon on
the display panel.
d. Press and hold the lter replacement
icon for 3 seconds until unit beeps.
HEPA Filter icon will ash amber.
Press lter icon area to alternate
between HEPA and Carbon.
e. Once desired lter is illuminated,
press and hold for 3-5 seconds. A
short beep will be heard and the light
should turn off. Repeat process for
each lter as needed.
1010