Filter
Top Products
Loosen
Screw
Latch
Mounting
screw
Projection
Groove
Tighten
Screw
Latch
Bottom Plate
15
1
1
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
parallel position and turn it over.
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
3
Turn the vacuum over
and place in the upright position.
2
2
Using a Philips screwdriver, loosen
the screw on the bottom plate and
slide the latch in the direction of the arrow.
Lift the bottom plate off.
Re-tighten the screw using a Philips
screwdriver and slide the latch in the
direction indicated by the arrow.
3