Filter
Top Products
GETTING TO KNOW YOUR HAND VACUUM
TROUBLE SHOOTING GUIDE
14
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
HAND VACUUM
WILL NOT
OPERATE
1. Power cord not firmly plugged
into outlet.
2. No power in wall outlet.
3. Needs servicing.
4. Thermostat has tripped.
1. Plug unit in firmly.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call 1-800-275-9251.
4. Turn the unit off and unplug
from outlet.
HAND VACUUM
WILL NOT PICK-UP
OR SUCTION
POWER IS WEAK
1. Dust cup is full.
2. Unit clogged.
3. HEPA Dust Cup Filter needs
cleaning or replacing.
1. Allow unit to cool down,
then Restart. Empty dust
cup – (see page 5).
2. Turn unit off and unplug
from wall outlet. Remove
HEPA Dust Cup Filter and
check for object(s) in air
duct and remove.
3. Clean or replace HEPA
Dust Cup Filter.
(see page 5)
DUST ESCAPING
FROM HAND
VACUUM
1. Dust cup is full.
2. HEPA Dust Cup Filter is not
installed correctly.
3. There is a puncture/hole in
HEPA Dust Cup Filter.
1. Empty dust cup.
2. Review HEPA Dust Cup
Filter instructions.
(see page 5)
3. Replace HEPA dust cup
filter. (see page 5)
HAND VACUUM
HOSE OR
BRUSHES WILL
NOT PICK-UP
1. Hose clogged.
2. Dust cup is full.
1. Remove hose and/or
brushes. Remove
obstruction from hose.
2. Empty and clean dust cup.
1. Brush Safety Cover
2. On/Off Switch
3. Dust Cup Release Button
4. Hose Clip
5. Flexible Hose
6. Dusting Brush
7. Dust Cup
8. Main Unit
9. Brush Chamber Exhaust Port
10. Hepa Filter
11. Debris Screen
12. Filter Chamber
13. Cover Release Button
14. Crevice Tool
Technical Specifications
Voltage: 120V., 60Hz.
Power: 6.67 Amps, 800 Watts
2
7