Filter
Top Products
10
Maintenance
Blade Cleaning
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
Periodic light wiping of the blades is recommended.
A feather duster will work best.
Avoid using cleansers, or harsh rags, which can warp and
ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
RECOMENDED: Periodically check that the blade holders to motor hub screws are secure and tight.
Operating Instructions - Pull Chain
Figure 18
Reversing
Switch
Speed Control
Pull Chain
Figure 17
MAIN FUSE BOX
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 17)
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then
slide the reverse switch to the opposite position and
turn fan on again. Your fan model is equipped with a
4-position, 3-speed, pull chain switch. (Figure 18)
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise Left
Winter Clockwise Right
2. Check the operation of the fan by gently pulling on
the fan speed pull chain.
Pull Chain Operating Sequence
1
st
Pull High
2
nd
Pull Medium
3
rd
Pull Low
4
th
Pull Off